Trusted Commercial Door Repairs & Maintenance for Sydney Businesses
At AJ Services Group, we help keep your business secure and running smoothly with expert commercial door repairs across Sydney.
Our team works on all door types, including those in offices, retail, warehouses, and healthcare facilities.
We fix malfunctioning entryways, sticking hinges, damaged hardware, and faulty automated systems.
From standard door repairs to roller door servicing and industrial roller door repairs, our technicians quickly resolve issues like misaligned frames, worn parts, and faulty closers to ensure your doors stay safe, compliant, and fully functional.
Where possible, we focus on repairs that restore performance and extend the life of your existing doors.
If replacement or door installation is needed, we’ll advise on the most practical solution for your premises.
Signs You Need Commercial Door Repair
Knowing when to arrange commercial door repairs is key to keeping your business secure and compliant.
Delaying action can risk safety, lead to bigger costs, and even cause business interruptions.
Our team at AJ Services Group has seen what can follow when repairs are put off too long across sites of every size.
Automatic Door Fails to Operate Consistently
If an automatic or motorised door won’t open, closes only part way, or responds erratically to controls, it probably needs immediate attention.
These faults can be caused by electrical issues, sensor failure, or worn drive mechanisms.
Our technicians resolve commercial door repairs across Sydney with the right tools and genuine replacement parts, ensuring business operations aren’t held up.
Visible Damage, Dents or Glass Breakage
Physical damage such as dents, shattered glass, or bent frames is more than an eyesore. It can compromise security and lead to code violations.
Insurance often requires rapid, professional repairs after damage, so it matters who you call.
We handle structural repairs and glazing onsite, getting your entry safe and compliant without delay.
Noises Indicate Wear or Imminent Failure
Grinding, squeaking, or banging from hinges, rollers or tracks are early warnings of mechanical problems.
Ignoring these noises can lead to the door failing altogether, causing downtime or safety hazards.
We handle repairs commercial sites need quickly, replacing or servicing moving parts before the issue worsens, saving money and disruption.
Lock, Access or Security Feature Issues
If locks, panic bars, or card readers fail, your premises becomes vulnerable and may fall out of compliance. Security system faults are common in high-traffic locations.
We restore or upgrade malfunctioning door hardware and access controls, supporting your business in meeting Sydney’s safety standards at all times.
If any of these situations sound familiar, reach out to AJ Services Group for reliable commercial door repairs.
Our prompt, knowledgeable service keeps your property protected and up to standard.
Types of Commercial Doors We Repair
Our team handles all major types of commercial doors found throughout Sydney.
Each door brings its own set of technical and compliance requirements.
Below, we explain which doors we service and how our approach ensures reliable, regulation-ready results.
Commercial Roller Doors
We frequently repair commercial roller doors in warehouses, car parks, and industrial door sites across Sydney.
These doors might be manual or motorised, each needing distinct repair techniques.
Our technicians fix everything from track misalignment and slat damage to more involved electrical or motor troubles.
We also handle upgrades to access control and address emergency override issues, always keeping in line with WHS regulations for safety and legal compliance.
Glass and Aluminium Shopfront Doors
Shopfront doors are a mainstay in retail and commercial properties.
We’re skilled at sorting issues such as misaligned glass doors, broken pivots, faulty closers, and even integrating with electronic or automatic opening systems.
If your business depends on secure, well-functioning shopfront access, our background in both mechanical and electrical repairs means we restore both security and ease for customers and staff.
Fire-Rated and Steel Security Doors
Fire-rated doors and steel security entryways play crucial roles in safety and insurance compliance.
We repair damaged seals, adjust closers, replace fire hardware, and restore corroded components.
Our team ensures each job meets Australian Standards, including recertification where required.
For steel security doors, we address frame, hinge, and lock faults, ensuring the door’s integrity in both normal and emergency conditions.
Automatic Sliding & Swing Doors
Automatic doors need swift, precise repairs to minimise downtime in busy sites like hospitals or offices.
We service sensors, actuators, and door motors, calibrating each part to meet AS 5007 and local building codes.
Our specialists manage both accessibility requirements and the latest safety features for doors and sliding gates used in commercial premises.
Our experience covers the full range of commercial door repairs.
If your site needs urgent maintenance or compliance checks, get in touch and we’ll make sure your doors are ready for business.
Common Door Problems We Repair in Sydney
Our team at AJ Services Group handles a broad range of commercial door repairs for clients across Sydney.
We’ve seen nearly every common problem that affects the performance, safety, and security of business entrances and access points.
Below are several of the most frequent door issues we fix as part of our commercial door repair service.
Misaligned or Stuck Commercial Doors
Misalignment often causes commercial doors to drag, jam, or not latch properly.
This is usually the result of worn hinges, loose fixings, or shifts in the building structure.
We assess each door’s fit, adjust hinges or pivots, and level frames so your entryways open and close smoothly.
Proper alignment is crucial for consistent operation and building security.
Faulty Door Closers and Springs
A faulty closer or door spring can make doors slam, stick, or fail to close entirely.
Our technicians specialise in repairing and replacing door closers, adjusting floor springs, and setting accurate tension.
We keep automatic and self-closing doors safe, reliable, and compliant with local accessibility standards.
Damage or Wear to Door Hardware
Commercial doors see intense daily use, leading to worn handles, locks, panic bars, or latches.
We repair and upgrade all door hardware, from aligning latches to fitting new locks or handles.
Our commercial door repairs focus on safety, proper operation, and up-to-date security requirements.
Roller Door and Shutter Problems
A roller door often suffers from jammed tracks, broken rollers, or warped slats, especially with frequent use in commercial sites.
We restore full function by clearing obstructions, servicing mechanisms, and replacing damaged parts.
Preventative repairs extend the life of these critical entry points and reduce downtime for your business.
If your business is dealing with any door problems, get in touch with our team for tailored commercial door repairs in Sydney.
We handle all urgent jobs that involve access issues or repairs door components affecting your business’s security.
Our Commercial Door Repair Service Process
Our team makes commercial door repairs straightforward and stress-free.
We focus on getting your business secure and operational with minimal interruption. Here’s how our process works.
Inspect and Assess the Door
We start by checking the condition of your commercial door. This includes looking for damage, misalignment, or worn parts that could affect safety or operation.
Diagnose Fault and Recommend Action
We test all moving parts to pinpoint the fault. Then we advise whether a targeted repair is enough or if replacement is the better option for long-term safety and compliance.
Complete Repairs and Test Operation
Once approved, we carry out the repair using materials suited to your door type. We then test all functions to ensure smooth and safe operation.
Verify Compliance and Issue Records
We confirm the door meets Sydney safety standards. If needed, we’ll provide documentation for your records.
Why Choose Us for Your Commercial Door Repairs
We know the frustration and safety risks a broken commercial door can cause. Our team has the experience and skills to keep your Sydney premises secure and business moving, without unnecessary disruption.
24/7 Emergency Callouts
Whether it’s a jammed entry door or a faulty closer, we’re available anytime to secure your site and get access back up and running.
All Commercial Door Types Covered
We repair aluminium entry doors, fire doors, swing doors, sliding doors, and more. No matter the make or model, we work out the issue and fix it using the right parts.
Trusted by Facility Managers and Strata
We work closely with building managers to meet site access requirements, keep disruption low, and ensure shared entry points are secure and functional.
Repairs That Meet Code and Access Rules
Every repair meets applicable safety, fire, and accessibility codes. We make sure your door works as it should and complies with Sydney’s regulations.
